Recommended installation.

Installation should be undertaken by qualified trade persons. Builders , Plumbers .

Local Council - Building requirements - permits if needed.

While it is not necessary to use our tank panel fixing accessory range. These items are designed for the tanks: with a specific installation application for the water storage system.

Designed as a wall panel. The tanks require support structures under most circumstances. Securing the tank panel to a structure post or bearer: should take in account a total weight factor approx (600kg) per full tank.

Situating the tank panel: It can be mounted directly on a floor level concrete pad. Or mounted on a tank stand, suitable to accommodate tank panel. While at the same time securing the panel with brackets or fastners, to the support structure.

DO NOT DRILL AND/OR PENETRATE ANY PART OF PLASTIC TANK OR METAL SURROUND. Refer DIY hints for anchor and fastening methods.

Plumbing the tank panel from storm water roof catchment areas: should not exceed a vertical length of six metres, guttering drop thru to tank panel water inlet. Inlet coupling should include - first flush divert, leaf and debris strainer,with easy access to inline tank filter mesh. Outlet coupling can than join to the inlet of next tank panel. Or discharge in storm water system.
Inter-tank plumbing and water flow outlet, depend on design.

Installation should take into account safety and health when implemented. With attention given to environmental aspects.

DIY installation. Optional.